Discover Alone ← Back to nearby map

← Back to the nearby map

Bealick Mill (Corn) — Bealick

Mill — corn
View what I want to do
Bealick Mill (Corn) — Bealick
Photo: Hywel Williams · Open the original picture · CC BY-SA 2.0 · Report the wrong picture · If this is your picture and you want it taken down, email me.
Know this place?

Add your own picture and explain the route, parking, gates, paths or landmarks that help people find it.

Earn 5 points after the picture is checked and accepted.

Add your photo and local directionsShare what you found

What is recorded here

On N bank of Laney River, near its confluence with Sullane River. Indicated on 1842 OS 6-inch map as 'Bealick Mills', with millrace approaching from E, which also powered a tuck mill (no longer surviving) c. 400m to E. By 1901 OS 6-inch map shows millrace rerouted, approaching 'Bealick Mill (Corn)' from N. Four-storey, 3-phase rectangular structure (14m NE-SW; 20m SE-NW), triple-gable-ended on NE and SW elevations, SE elevation of 4 bays. Roof originally half-hipped but now gabled with asbestos sheeting; internally the rooms are divided by cast-iron columns with maker's name: 'Perrotts Cork', cast on them. Millpond to NE; wheel-pit along NE elevation houses cast-iron suspension wheel (diam. 6.37m; Wth 3.28m) with inscription 'McSwiney' cast on shrouding; pinion wheel transfers power into mill. Access to interior not gained. Rynne's (1993b) report of interior fittings describes pinion-wheel powered cast-iron pit-wheel (diam. 3.05m) within, which turned two auxiliary shafts powering at least two pairs of millstones. Two turbines in NE side of mill; the one still in use is a downward axial flow turbine which actuates a generator. Other turbine (not visible) disused, upper shaft geared to transfer power to mill machinery which operated on a belt and pulley system; also powered a generator installed 1898 which provided Macroom with electric light (Mould 1991, 163). Rynne (ibid.) suggests surviving machinery dates to 1887-97. Saw mills were installed in 1903-11 at SE end of mill and ultimately became mill's primary function. Possible grain drying kiln to NW but later rebuilt/extended to form NW part of mill. Provided power for 20th-century Macroom Iron Foundry to N. Mills undergoing restoration at present (1995). The above description is derived from the published 'Archaeological Inventory of County Cork. Volume 3: Mid Cork' (Dublin: Stationery Office, 1997). In certain instances the entries have been revised and updated in the light of recent research. Date of upload/revision: 14 January 2009

The monument record does not grant public access. Check the route and ask the landowner before entering private land.